NIIN Output Data
NIIN:
NSN:
Item Name:
PIN , STRAIGHT , HEADLESS
Definition:
A HEADLESS, CYLINDRICALLY-SHAPED ITEM HAVING A STRAIGHT, SMOOTH, SOLID BODY, WITH OR WITHOUT A DRILLED HOLE(S). IT HAS AN OUTSIDE DIAMETER EQUAL TO OR LESS THAN ITS LENGTH. ITS LENGTH MUST NOT EXCEED TWELVE INCHES (304 MM); FOR ITEMS WHOSE LENGTH EXCEEDS TWELVE INCHES (304 MM); SEE ROD, STRAIGHT, HEADLESS. IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. SEE ALSO PIN, STRAIGHT, THREADED.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 163B5556 | 05606 | A | 3 | 2 | 2 | SB |
CAGE Information
| Code | Company |
|---|---|
| 05606 | GENERAL DYNAMICS ARMAMENT AND TECHNI |
Federal Supply Class
Title
NAILS, MACHINE KEYS, AND PINS
Inclusions:
INCLUDES DOWEL PINS, SPLIT PINS; SPIKES; TACKS; NONOFFICE TYPE STAPLES; MACHINE KEYS; BRADS; SHOULDERED PINS; COTTER PINS; NAILS.
Exclusions:
EXCLUDES SHAFTS (FSC 3040); LOCK KEYS (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| ACHT | PIN OVERALL LENGTH | 0.820 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | RADIUS |
| SFTT | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
| CQFM | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| AMCS | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL |
| ACHU | PIN OVERALL DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ALWS | SECOND END CORNER RADIUS | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | CHAMFERED |
| ABRC | FIRST HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624,COMP 4140 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ALWR | FIRST END CORNER RADIUS | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TYPE M,CLASS 1 OR TYPE Z,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |