Part Number
Part Number:
NSN:
NIIN:
Item Name:
FILTER , BAND PASS
Definition:
AN ITEM DESIGNED TO PASS FREQUENCIES WITHIN A SPECIFIED RANGE (BAND) AND TO SUPPRESS FREQUENCIES OUTSIDE THE RANGE (BAND). EXCLUDES A SINGLE INDUCTANCE, OR A SINGLE CAPACITANCE, OR A SINGLE RESISTANCE. SEE COIL (AS MODIFIED); REACTOR; CAPACITOR (AS MODIFIED); AND RESISTOR (AS MODIFIED).
CAGE Information
| Code | Company |
|---|---|
| 14304 | HARRIS CORPORATION DBA HARRIS RF COM |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | 1.03 KILOHERTZ BLANK AND 1.18 KILOHERTZ BLANK |
| ADAR | BODY OUTSIDE DIAMETER | 2.562 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.562 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.094 INCHES NOMINAL |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.177 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 3.234 INCHES MINIMUM AND 3.375 INCHES MAXIMUM |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| AHAS | LOAD IMPEDANCE PER FUNCTION | 600.0 OHMS BLANK |
| CQDR | INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 6.0 BLANK |
| ABKW | OVERALL HEIGHT | 3.703 INCHES NOMINAL |
| AHAJ | REFERENCE FREQUENCY PER FUNCTION | 1.105 KILOHERTZ BLANK |
| AHAQ | SOURCE IMPEDANCE RATING PER FUNCTION | 600.0 OHMS BLANK |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG OUTPUT |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 24.0 MINIMUM BLANK AND 6.0 NOMINAL BLANK AND 6.0 NOMINAL BLANK AND 24.0 MINIMUM BLANK |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG GROUND |
| ABHP | OVERALL LENGTH | 2.562 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 1.18 KILOHERTZ BLANK AND 1.03 KILOHERTZ BLANK AND 935.00 HERTZ BLANK AND 1.275 KILOHERTZ BLANK |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT |
| AHBX | DISTANCE BETWEEN MOUNTING SURFACE AND LOWER END | 0.453 INCHES NOMINAL |