Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 10941 | CARVER PUMP COMPANY INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.562 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | 37.000 INCHES NOMINAL |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| AGAV | END ITEM IDENTIFICATION | CENTRIFUGAL PUMP |
| AMFZ | SECOND END DIAMETER | 1.5040 INCHES MINIMUM AND 1.5060 INCHES MAXIMUM |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.812 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 14 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CL A OR B FED SPEC SINGLE MATERIAL RESPONSE |
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| AMDL | FIRST END DIAMETER | 1.7717 INCHES MINIMUM AND 1.7722 INCHES MAXIMUM |
| CSPY | LARGEST STEP DIAMETER | 2.248 INCHES MINIMUM AND 2.249 INCHES MAXIMUM |
| MATT | MATERIAL | NICKEL ALLOY |