NIIN Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2019 | 99832 | F | 5 | 9 | X | XX | ||
| 8B4159 | 11083 | A | 5 | 2 | X | XX | ||
| 851626 | 12603 | R | 5 | 9 | X | XX | ||
| VINC2019 | 40152 | R | 5 | 9 | 5 | KZ | ||
| 2019 | 23926 | A | 5 | 2 | X | XX | ||
| V1NC2019 | 77237 | A | 5 | 2 | 5 | ZZ | ||
| V2019 | 77237 | A | 5 | 2 | 5 | ZZ | ||
| V2019 | 89749 | A | 5 | 9 | X | XX | ||
| V2019 | 12603 | R | 5 | 9 | X | XX | ||
| VINC2019 | 77237 | A | 5 | 2 | 5 | ZZ | ||
| 2019 | 36384 | H | 5 | 9 | X | XX | ||
| 2019 | 89749 | A | 5 | 2 | 5 | ZZ | ||
| 10388 | 33844 | A | 3 | 2 | X | XX | ||
| 851626 | 89749 | A | 5 | 2 | 5 | ZZ | ||
| 2019 | 05415 | A | 5 | 2 | X | XX | ||
| P12739 | 04285 | F | 5 | 9 | X | XX | ||
| V1NC2019 | 40152 | R | 5 | 9 | 5 | KZ | ||
| V2019 | 40152 | R | 5 | 9 | 5 | KZ | ||
| 2019 | 12603 | R | 5 | 9 | X | XX | ||
| 51139 | 33844 | A | 3 | 2 | X | XX |
CAGE Information
| Code | Company |
|---|---|
| 04285 | ATHEY PRODUCTS CORP |
| 99832 | SCOTT HUBER ESSICK A CO OF FIGGIE IN |
| 11083 | CATERPILLAR INC. DBA CATERPILLAR DIV |
| 12603 | CLARK EQUIPMENT CO |
| 40152 | VME AMERICAS INC SUB OF VME GROUP N |
| 23926 | KOMATSU AMERICA INTL CO |
| 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
| 89749 | CLARK MATERIAL HANDLING COMPANY |
| 36384 | FMC CORP LINK-BELT DIV |
| 33844 | KLAUER MFG CO |
| 05415 | LINDE LIFT TRUCK CORP. |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-6183 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-6183 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAUB | HOLE DIAMETER | 0.698 INCHES MINIMUM AND 0.708 INCHES MAXIMUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| MATT | MATERIAL | CORK OVERALL AND RUBBER SYNTHETIC OVERALL |
| CQFM | HARDNESS RATING | 60.0 DUROMETER MINIMUM AND 70.0 DUROMETER MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.258 INCHES MINIMUM AND 1.268 INCHES MAXIMUM |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| ABNM | THICKNESS | 0.278 INCHES MINIMUM AND 0.293 INCHES MAXIMUM |