NIIN Output Data
NIIN:
NSN:
Item Name:
CYLINDER ASSEMBLY , HYDRAULIC BRAK
Definition:
A DEVICE CONSISTING OF A RESERVOIR AND/OR CYLINDER, HYDRAULIC BRAKE, MASTER WITH OTHER COMPONENTS NECESSARY TO DISPLACE FLUID FROM A CENTRAL SOURCE FOR ACTUATING THE SLAVE OR WHEEL CYLINDERS OF A HYDRAULIC BRAKE SYSTEM.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| E34224 | 80724 | F | 5 | 9 | 6 | AX | ||
| FE33501 | 63477 | A | 5 | 9 | 6 | AX | ||
| FE34224C | 63477 | A | 3 | 2 | A | AX | ||
| FE34224 | 63477 | A | 5 | 9 | 6 | AX | ||
| MC-34224 | 76761 | A | 5 | 9 | 6 | AX | ||
| M34224 | 71425 | A | 5 | 2 | 6 | AX | ||
| J3159418 | 99343 | A | 5 | 2 | 6 | AX | ||
| 1086 | 06840 | H | 5 | 9 | 6 | AX | ||
| 3202478 | 99343 | A | 5 | 9 | 6 | AX | ||
| F34224 | 63477 | A | 5 | 9 | 6 | AX | ||
| 3159418 | 99343 | A | 5 | 9 | 6 | AX | ||
| MC-34224 | 66614 | A | 5 | 2 | 6 | AX | ||
| H-34224 | 86403 | A | 5 | 2 | 6 | AX | ||
| 33948 | 10695 | A | 5 | 2 | 6 | AX | ||
| 35036 | 19239 | A | 5 | 2 | 6 | AX | ||
| 174-26 | 76462 | A | 5 | 2 | 6 | AX |
CAGE Information
| Code | Company |
|---|---|
| 06840 | BENDIX CORP THE |
| 80724 | EIS BRAKE PARTS DIV OF STANDARD MOTO |
| 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE |
| 76761 | C. E. NIEHOFF & CO. |
| 71425 | AIRTEX PRODUCTS DIV OF UIS INC |
| 99343 | CHRYSLER CORP ENGINE AND COMPONENTS |
| 66614 | TRW INC REPLACEMENT PARTS DIV |
| 86403 | CHRYSLER CORP SERVICE AND PARTS OPNS |
| 10695 | TAYLOR-DUNN CORPORATION DBA METRO CR |
| 19239 | ECHLIN INC |
| 76462 | DELCO MORAINE DIV OF GENERAL MOTORS |
Federal Supply Class
Title
VEHICULAR BRAKE, STEERING, AXLE,
Inclusions:
INCLUDES TURRENT BRAKES; CLUTCH BRAKES, TANK TURRET.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAFZ | BODY MATERIAL | ANY ACCEPTABLE |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE PISTON ROD END |
| CLMT | PORT STYLE | GASKET SEAL |
| AMQZ | COMPRESSED LENGTH | 6.250 INCHES NOMINAL |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNS |
| ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| CLMS | PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END |
| ATEM | EXTENDED LENGTH | 7.375 INCHES NOMINAL |
| CLNB | PORT THREAD CLASS | 2B |
| CLMX | PORT THREAD DIAMETER | 0.438 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.000 INCHES NOMINAL |
| CLMY | PORT THREAD QUANTITY PER INCH | 24 |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 3.395 INCHES MINIMUM |
| ABMK | OVERALL WIDTH | 4.235 INCHES MINIMUM AND 4.245 INCHES MAXIMUM |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 3.405 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 3.833 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| CBBL | FEATURES PROVIDED | RUBBER BOOT |
| ABJH | TEMP RATING | NOT RATED |
| AFLW | ACTUATION METHOD | DIRECT |
| BMWH | RESERVOIR TYPE | INTEGRAL |
| CLMQ | MOUNTING FACILITY DIAMETER | 0.375 INCHES NOMINAL |