Part Number
Part Number:
NSN:
NIIN:
Item Name:
DISK , CLUTCH , VEHICULAR
Definition:
A SOLID CIRCULAR DISK OF WIRE-WOVEN LINING MATERIAL OR CERAMIC AND METAL SUBSTANCE AND THE LIKE, MOLDED TO ONE OR BOTH SIDES AND FASTENED DIRECTLY OR INDIRECTLY TO THE CENTER SPLINE OR HUB, WHICH RECEIVES AND TRANSMITS MOTION OR POWER BY ENGAGEMENT WITH THE PRESSURE PLATE ASSEMBLY AND THE FLYWHEEL OR THE LIKE. INCLUDES DRY OR WET TYPE DISK, AND MAY INCLUDE DAMPER SPRINGS. THIS ITEM IS DESIGNED TO BE USED ON TANKS, AUTOMOBILES, CONSTRUCTION EQUIPMENT, AND THE LIKE IN CONJUNCTION WITH A CLUTCH ASSEMBLY, FRICTION.
CAGE Information
| Code | Company |
|---|---|
| 13475 | FRICTION HOLDINGS LLC DBA FRICTION P |
Federal Supply Class
Title
VEHICULAR POWER TRANSMISSION COM
Inclusions:
INCLUDES TRANSFER TRANSMISSION ASSEMBLIES; CLUTCH ASSEMBLIES; UNIVERSAL JOINTS; PROPELLER SHAFTS; AUTOMOTIVE TORQUE CONVERTERS; POWER TAKEOFFS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | 2350-01-087-1095 |
| BSQC | TEETH QUANTITY PER DISK | 48 |
| ARJD | DESIGN FORM | SOLID |
| AQQF | MATERIAL LOCATION | BOTH SIDES |
| BSQB | TEETH QUANTITY PER SET | 48 |
| BSQD | TEETH PITCH DIAMETER | 0.266 INCHES NOMINAL |
| MATL | MATERIAL | STEEL |
| CBBL | FEATURES PROVIDED | FRICTION MATERIAL FACING AND MATERIAL FACING GROOVE |
| FLEX | FLEXIBILITY | RIGID |
| AJAS | ANGLE BETWEEN LUGS IN DEG | 20.000 NOMINAL |
| AGWM | LARGEST OUTSIDE DIAMETER | 7.622 INCHES NOMINAL |
| BPLM | DISK TYPE | INTERNAL TEETH |
| AQQH | TOOTH ARRANGEMENT | SETS EQUALLY SPACED |
| ABPX | MATERIAL THICKNESS | 0.020 INCHES NOMINAL |
| APGF | DESIGN TYPE | DRY |
| BSPZ | TEETH SET QUANTITY | 1 |
| CQCF | CONSTRUCTION | SOLID |
| BSPH | MATERIAL INSIDE DIAMETER | 6.500 INCHES NOMINAL |
| BSPJ | SECTION QUANTITY PER SIDE | 1 |
| FEAT | SPECIAL FEATURES | 66 RIGHT AND LEFT HAND GROVES EQUALLY SPACED BY GENERATING WITH 7,8,9,ON 10 PARTIAL DIAMONDS WHEN MEASURED ALONG GROVES FROM ID AND OD OF FACING BOTH SIDES |
| ABNM | THICKNESS | 0.157 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |