Part Number
Definition:
A DEFORMABLE MATERIAL WHICH PREVENTS THE PASSAGE OF MATTER THROUGH THE JOINT FORMED WHEN TWO FACES ARE JOINED. IT MAY BE METALLIC OR NONMETALLIC, LUBRICATED OR IMPREGNATED, SOLID OR HOLLOW CROSS SECTION. IT MAY BE MADE TO ANY PREDETERMINED DIMENSION AND SHAPE. EXCLUDES FLAT DISKS, ITEMS MADE OF FELT MATERIAL AND ITEMS HAVING JOINTS. FOR ROUND METAL AND PLASTIC ITEMS WITH AN APERTURE AND A SOLID RECTANGULAR CROSS SECTION, SEE WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; AND SPACER RING. EXCLUDES DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; AND RING, SEALING JAR.
CAGE Information
| Code | Company |
|---|---|
| 91547 | HONEYWELL INTERNATIONAL INC DBA ENGI |
Federal Supply Class
Title
PACKING AND GASKET MATERIALS
Inclusions:
INCLUDES GENERAL PURPOSE OIL GREASE, AIR, LIQUID, GAS, AND CHEMICAL SEALS; OAKUM; PREFABRICATED GASKETS AND SEALS DESIGNED FOR A SINGLE SPECIFIC APPLICATION.
Exclusions:
EXCLUDES O-RINGS (FSC 5331); BULK MATERIAL ITEMS, SUCH AS; RUBBER, CORK, AND ASBESTOS SHEETS AND STRIPS (FSG 93); LIQUID GASKET MATERIALS (RTV, PERMATEX, ETC.) (FSG 80); RFI AND EMI SEALS AND GASKETS (FSC 5999), AND ALL SEAL RETAINERS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | 0.338 IN. NOM DIA BOLT HOLE LOCATED ON LEFT SIDE AND 0.345 IN. NOM DIA BOLT HOLE LOCATED ON RIGHT SIDE WITH 90.0 DEG COUNTERSINK |
| ADVJ | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.260 INCHES NOMINAL |
| MATT | MATERIAL | ASBESTOS OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABHP | OVERALL LENGTH | 0.960 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.560 INCHES NOMINAL |
| ABPZ | END RADIUS | 0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.067 INCHES MINIMUM AND 0.071 INCHES MAXIMUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | FIBRE OR COMPOSITION WITH WIRE INSERT |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.410 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |