Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , SPUR
Definition:
A GEAR, CYLINDRICAL IN FORM, WITH STRAIGHT TEETH ON THE OUTER SURFACE PARALLEL TO THE AXIS OF THE GEAR. SEE ALSO GEAR, ANTIBACKLASH, SPUR. FOR BULK MATERIAL, SEE ROD, PINION.
CAGE Information
| Code | Company |
|---|---|
| 24930 | ITT CORPORATION DBA ITT ELECTRONICS |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CWXP | THIRD STEP NOMINAL LENGTH | 0.065 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.690 INCHES SECOND END |
| MATT | MATERIAL | STEEL COMP 4340 OVERALL |
| CWWN | END NOMINAL DIAMETER | 0.590 INCHES SECOND END |
| CWRS | BORE NOMINAL DIAMETER | 0.500 INCHES BOTH ENDS |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.984 INCHES FIRST END |
| AAQL | BODY STYLE | PLAIN, SOLID |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.483 INCHES SECOND END |
| AJLA | TEETH QUANTITY | 23 |
| CWWH | END NOMINAL LENGTH | 0.672 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.136 INCHES SECOND END |
| ABSA | SPLINE QUANTITY | 1 BOTH ENDS |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.235 INCHES FIRST END |
| CWXL | SECOND STEP NOMINAL DIAMETER | 1.140 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.438 INCHES FIRST END |
| CWXT | THIRD STEP NOMINAL DIAMETER | 0.690 INCHES FIRST END |
| BDTX | SPLINE PITCH DIAMETER | 0.4591 INCHES NOMINAL BOTH ENDS |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
| CWRM | FACE NOMINAL WIDTH | 0.313 INCHES |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| CWXG | SECOND STEP NOMINAL LENGTH | 0.065 INCHES FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.040 INCHES |
| CWWN | END NOMINAL DIAMETER | 0.812 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | 0.800 IN. LG OF SPLINES IN BORE |
| AGJS | PITCH DIAMETER | 0.9583 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWWH | END NOMINAL LENGTH | 0.347 INCHES SECOND END |
| CWTR | HUB STYLE DESIGNATOR | 3 STEPS FIRST END |
| CWNH | TOOTH FORM | STANDARD |