Part Number
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code | Company |
|---|---|
| 75377 | KURZ & ROOT GENERATOR COMPANY LLC |
Federal Supply Class
Title
LUGS, TERMINALS, AND TERMINAL ST
Inclusions:
INCLUDES BINDING POSTS; BATTERY CLIPS; STUD TERMINALS; TEST CLIPS.
Exclusions:
EXCLUDES CAPS, ELECTRICAL; CLIPS, ELECTRICAL; AND CONTACTS, ELECTRICAL.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABCX | BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| MATT | MATERIAL | PLASTIC BOARD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| CQCW | FEEDTHRU CONNECTION END TYPE | 597 BOTH ENDS SINGLE COMBINATION |
| ABDX | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.500 INCHES |
| ABGT | BOARD THICKNESS | 0.250 INCHES |
| AAQL | BODY STYLE | BLOCK TYPE |
| AAMA | MOUNTING HOLE DIAMETER | 0.281 INCHES |
| MARK | SPECIAL MARKINGS | F-1,F-2,C-1,C-2,H-1 THRU H-4,L-O THRUL L-3,1,2,4,7,X-2,X-3,X-6,X-7,X-9 AND X-10 |
| CWLG | TERMINAL PATTERN ARRANGEMENT | RANDOM |
| MATT | MATERIAL | COPPER ALLOY TERMINALS |
| ABDV | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 6.500 INCHES |
| ABDW | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.500 INCHES |
| ABGP | BOARD OVERALL WIDTH | 7.000 INCHES |
| ABDB | TERMINAL FACILITY QUANTITY | 2 |
| ABDU | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 22.500 INCHES |
| ABGN | BOARD OVERALL LENGTH | 23.000 INCHES |
| CWLN | TERMINAL DESIGN | FEEDTHRU |
| CRZR | FEEDTHRU TERMINAL QUANTITY | 29 SINGLE COMBINATION |