Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 1C799 | DIEMASTER TOOL INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.0780 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMFZ | SECOND END DIAMETER | 4.1100 INCHES MINIMUM AND 4.2100 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 1 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.0751 INCHES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 28 |
| ABHP | OVERALL LENGTH | 16.700 INCHES MINIMUM AND 16.950 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 1.8300 INCHES NOMINAL |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| AMGF | SECOND END PITCH DIAMETER | 20.0000 INCHES NOMINAL |
| AMGE | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |