Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ATPC | STEP QUANTITY | 8 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.4050 INCHES MINIMUM AND 1.4150 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| AMDL | FIRST END DIAMETER | 1.4050 INCHES MINIMUM AND 1.4150 INCHES MAXIMUM |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 1.210 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) |
| AAHX | SECOND END GROOVE DIAMETER | 1.1700 INCHES MINIMUM AND 1.1800 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.0600 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| ABHP | OVERALL LENGTH | 5.700 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 1.340 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 17-4PH |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.3100 INCHES MINIMUM AND 1.3110 INCHES MAXIMUM |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.1780 INCHES MINIMUM AND 1.1860 INCHES MAXIMUM |
| CSPY | LARGEST STEP DIAMETER | 1.497 INCHES MINIMUM AND 1.499 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 1.4970 INCHES MINIMUM AND 1.4990 INCHES MAXIMUM |
| AAHW | SECOND END GROOVE WIDTH | 0.0560 INCHES MINIMUM AND 0.0610 INCHES MAXIMUM |