National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 3273674 | 72915 | A | 5 | 9 | 5 | AX | ||
| 3273674 | 55380 | A | 3 | 2 | 5 | AX | ||
| K-3273674 | 18954 | F | 5 | 9 | 2 | AX | ||
| G6BD1 | 0AHP5 | A | 5 | 9 | 5 | AX | ||
| 21-00263-00 | 0AHP5 | A | 3 | 2 | 3 | AX |
CAGE Information
| Code | Company |
|---|---|
| 0AHP5 | CURTISS-WRIGHT CONTROLS INC DIV FLIG |
| 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE D |
| 55380 | HATCH & KIRK INC. |
| 18954 | KORODY-COLYER CORP A CR INDUSTRIES C |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.7475 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM |
| BDSQ | FIRST END SPLINE QUANTITY | 6 |
| CSPY | LARGEST STEP DIAMETER | 0.875 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.7475 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM |
| BDSR | SECOND END SPLINE QUANTITY | 36 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.6190 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| MATT | MATERIAL | STEEL |
| AAHP | SECOND END STYLE | SPLINED (STRAIGHT) |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.5770 INCHES MINIMUM AND 0.5820 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 1.000 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 5.438 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 0.500 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 5 |