National Stock Number (NSN) Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| ZA1133 | 13829 | A | 3 | 2 | 6 | AX | ||
| 627757C1 | 92679 | A | 5 | 9 | 6 | AX | ||
| S81491 | 10988 | A | 5 | 2 | 2 | AX | ||
| 627757C1 | 29510 | R | 5 | 9 | 6 | AX | ||
| 101821 | 29510 | R | 5 | 9 | 6 | ZZ | ||
| 101821 | 0SAT8 | A | C | 1 | 6 | ZZ | 9F |
CAGE Information
| Code | Company |
|---|---|
| 0SAT8 | KOMATSU AMERICA CORP. |
| 13829 | PARKER-HANNIFIN CORPORATION DBA MOBI |
| 92679 | NAVISTAR INTL CORP MELROSE PARK ENGI |
| 10988 | CNH AMERICA LLC |
| 29510 | KOMATSU AMERICAN INTL CO |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDL | FIRST END DIAMETER | 0.7204 INCHES MINIMUM AND 0.7254 INCHES MAXIMUM |
| AMDR | FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| ABHP | OVERALL LENGTH | 1.875 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | BORE LG OF SHAFT,DIA 0.250 IN. |
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.7204 INCHES MINIMUM AND 0.7254 INCHES MAXIMUM |
| BDSQ | FIRST END SPLINE QUANTITY | 17 |
| AMDS | FIRST END PITCH DIAMETER | 0.7083 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 8620 |
| ATPC | STEP QUANTITY | 3 |
| CSPY | LARGEST STEP DIAMETER | 0.770 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 0.828 INCHES MINIMUM AND 0.838 INCHES MAXIMUM |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.6453 INCHES MINIMUM AND 0.6543 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 100.0 MICROINCHES |
| AAHN | END SIMILARITY | IDENTICAL |