Part Number
Part Number:
NSN:
NIIN:
Item Name:
BOOT , DUST AND MOISTURE SEAL
Definition:
A FLEXIBLE, NONMETALLIC ITEM DESIGNED TO PREVENT ENTRY OF DUST, MOISTURE AND OTHER CONTAMINANTS INTO CRITICAL AREAS AROUND SHAFTS, LEVERS, ELECTRICAL WIRES AND HOSES. SEALING MAY BE EITHER STATIC OR DYNAMIC. THE ITEM MAY INCLUDE MOUNTING HARDWARE (SUPPORT PLATES, CLAMPS AND THE LIKE). EXCLUDES BELLOWS, PROTECTION; GROMMET, NONMETALLIC; AND CABLE NIPPLE, ELECTRICAL. SEE ALSO CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; AND SHIELD, ELECTRICAL CONNECTOR.
CAGE Information
| Code | Company |
|---|---|
| 98675 | ESPEY MFG & ELECTRONICS CORP. USE CA |
Federal Supply Class
Title
SWITCHES
Inclusions:
INCLUDES ROTARY, KNIFE, TOGGLE, PUSH BUTTON, MERCURY, THERMOSTATIC, AND DIFFERENTIAL PRESSURE SWITCHES.
Exclusions:
EXCLUDES SWITCHGEAR.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STYL | STYLE DESIGNATOR | CLOSED END |
| CQJX | NOMINAL THREAD SIZE | 0.469 INCHES |
| ACUW | SEALING METHOD | COMPRESSION |
| BZRR | THREAD SERIES | UNS |
| ASDB | WIDTH ACROSS FLATS | 0.625 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.176 INCHES NOMINAL |
| BGKC | OPENING INSIDE DIAMETER | 0.125 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | INTEGRAL THREADED NUT |
| ACUP | MOUNTING DEVICE QUANTITY | 1 |
| TEST | TEST DATA DOCUMENT | 81349-MIL-B-5423 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABKW | OVERALL HEIGHT | 0.844 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.053 INCHES NOMINAL |
| ACTW | DOME HEIGHT | 0.791 INCHES NOMINAL |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF-NEMA TYPE 13 AND WATERTIGHT-NEMA TYPE 4 |
| CSFT | BASE THREAD LOCATION | INTERNAL |
| MATT | MATERIAL | RUBBER SILICONE BODY |
| AAJD | THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 32 |