Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , AXLE , AUTOMOTIVE
Definition:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
CAGE Information
| Code | Company |
|---|---|
| 78880 | FLXIBLE CO THE |
Federal Supply Class
Title
VEHICULAR POWER TRANSMISSION COM
Inclusions:
INCLUDES TRANSFER TRANSMISSION ASSEMBLIES; CLUTCH ASSEMBLIES; UNIVERSAL JOINTS; PROPELLER SHAFTS; AUTOMOTIVE TORQUE CONVERTERS; POWER TAKEOFFS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.975 INCHES MINIMUM AND 1.980 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.830 INCHES MINIMUM AND 1.840 INCHES MAXIMUM |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE AND 2 UNTHREADED HOLE |
| AMQF | SECOND END TYPE | SPLINED |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AMQA | FIRST END TYPE | FLANGED |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| AMGA | SECOND END SPLINE LENGTH | 3.312 INCHES NOMINAL |
| AHTC | FLANGE OUTSIDE DIAMETER | 6.623 INCHES NOMINAL |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| ABHP | OVERALL LENGTH | 40.469 INCHES MINIMUM AND 40.594 INCHES MAXIMUM |
| MATL | MATERIAL | STEEL, AISI 4150H |
| ABUJ | THREAD SIZE | 1/2-13 |
| BNYS | FLANGE OVERALL THICKNESS | 0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.375 INCHES NOMINAL |