Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGE | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.8750 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 6 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| BDSR | SECOND END SPLINE QUANTITY | 15 |
| AAGZ | FIRST END STYLE | PLAIN |
| CSPY | LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| ABHP | OVERALL LENGTH | 1.277 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.9375 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.0000 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| ZZZV | FSC APPLICATION DATA | ACTUATOR SWEEP FLIGHT CONTROL SYSTEM |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| AMFZ | SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 0.232 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.2490 INCHES NOMINAL |