Part Number
Part Number:
NSN:
NIIN:
Item Name:
FILTER , RADIO FREQUENCY INTERFERE
Definition:
AN ITEM DESIGNED TO SUPPRESS UNDESIRED (INTERFERING) FREQUENCIES AND HAVE A MINIMAL EFFECT ON THE DESIRED FREQUENCIES WHEN INSERTED IN AN ELECTRICAL POWER CIRCUIT. EXCLUDES ITEMS WHICH CONSIST OF A SINGLE CAPACITOR, INDUCTOR, RESISTOR, OR DEVICES CONSISTING OF ONLY TWO OR MORE CIRCUIT ELEMENTS OF THE SAME BASIC NAME. EXCLUDES FILTER, LOW PASS AND SUPPRESSOR, IGNITION INTERFERENCE. FOR ITEMS DESIGNED TO BE INSERTED IN A LINE WHICH IS PRIMARILY INTENDED TO CARRY HIGH FREQUENCY WAVES MODULATED WITH SIGNALS, SUCH AS ANTENNA LEAD-IN, SEE FILTER, BAND SUPPRESSION AND FILTER, BAND PASS. SEE ALSO LIMITER, ELECTRICAL NOISE.
CAGE Information
| Code | Company |
|---|---|
| 0AM43 | LCR ELECTRONICS INC. |
Federal Supply Class
Title
FILTERS AND NETWORKS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 WIRE LEAD GROUND |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| AHAS | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK |
| ADAQ | BODY LENGTH | 4.060 INCHES MAXIMUM |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 WIRE LEAD INPUT |
| ADAU | BODY HEIGHT | 1.460 INCHES NOMINAL |
| CQRG | BODY MATERIAL | METAL |
| STYL | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON TWO SURFACES |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.810 INCHES NOMINAL |
| CQGC | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 50.0 VOLTS 23RD BAND SUPPRESSION NOT SPECIFIED |
| FEAT | SPECIAL FEATURES | ONE WIRE LEAD WITH CONNECTOR AND ONE WIRE LEAD WITH TWO SOLDER LUGS |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 WIRE LEAD OUTPUT |
| AHBC | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 5.0 BLANK |
| AHAQ | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK |
| AKNA | INCLOSURE TYPE | ENCASED |
| PKWT | UNPACKAGED UNIT WEIGHT | 1.000 POUNDS |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.135 INCHES NOMINAL |
| ADAT | BODY WIDTH | 1.145 INCHES NOMINAL |