Part Number
Definition:
AN AXLE HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS), PERIPHERSL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOLDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS COUPLINGS AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO TRANSMIT MOTION SEE SHAFT(1), SHOULDER. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1),STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | 2ND END BASE 3.5000 IN. LONG X 3.0000 IN. WIDE X 0.6250 IN. THICK; SPINDLE, DOG USED ON LS BOMB ELEV. 7A DOOR 4TH DECK FR 183 HRWT 72 X 72 L.H. |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AGAV | END ITEM IDENTIFICATION | CVA(N)65 |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 1.0625 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.6555 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-16974 CR 8620 MIL SPEC SINGLE MATERIAL RESPONSE |
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| MATT | MATERIAL | STEEL |
| ATPC | STEP QUANTITY | 3 |
| AMDL | FIRST END DIAMETER | 0.8750 INCHES NOMINAL |