Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 05353 | CADILLAC CONTROLS DIVISION OF EX-CEL |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGE | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 14 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMFZ | SECOND END DIAMETER | 0.3270 INCHES MINIMUM AND 0.3310 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 10 |
| ABHP | OVERALL LENGTH | 2.595 INCHES MINIMUM AND 2.605 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.3090 INCHES MINIMUM AND 0.3095 INCHES MAXIMUM |
| ZZZV | FSC APPLICATION DATA | CONTROL ASSY,PRESSURE RATIO BLEEDACFT ENGINE,2995001398687 743548 |
| MATT | MATERIAL | STEEL |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| CSPY | LARGEST STEP DIAMETER | 0.4375 INCHES MINIMUM AND 0.4385 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.1900 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM |
| AMGF | SECOND END PITCH DIAMETER | 0.2917 INCHES NOMINAL |