Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 97403 | CECOM LR CENTER |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-11588,TYPE 3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-11588,TYPE 3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, BUTADIENE ACRYLONITRILE |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD ERR-100 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 1 CLASS |
| ABKV | OUTSIDE DIAMETER | 2.000 INCHES MINIMUM AND 2.062 INCHES MAXIMUM |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED, MIL-A-8625, TYPE 2 |
| CRDW | HYDROSTATIC TEST PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| ADLH | SECOND END FITTING SPEC/STD DATA | MIL MS27021-9 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABJH | TEMP RATING | -32.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-H-11588 GOVERNMENT SPECIFICATION |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AWLS | CONNECTION TYPE | INTERNAL QUICK DISCONNECT 1ST END |
| AHNC | CONNECTION STYLE | CAM OR LEVER (EXTERNAL) 2ND END |
| FEAT | SPECIAL FEATURES | SUPPLIED W/DUST CAP MS27028-9,DUST PLUG MS27029-9,FOUR GASKETS MS27030-5 AND FOUR 1-1/2 IN. FLAT CRES HOSE CLAMPS |
| CQBD | BURST TEST PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| CQGM | MAXIMUM OPERATING PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | ERR-070 OR ERR-070 |
| AARX | INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AHNC | CONNECTION STYLE | CAM OR LEVER (INTERNAL) 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| ADLP | QUICK DISCONNECT NOMINAL SIZE | 1.500 INCHES 1ST END |
| AWLS | CONNECTION TYPE | EXTERNAL QUICK DISCONNECT 2ND END |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ADLP | QUICK DISCONNECT NOMINAL SIZE | 1.500 INCHES 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND ABRASION RESISTANT AND FUEL RESISTANT |
| ADLG | FIRST END FITTING SPEC/STD DATA | MIL MS27025-9 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRXX | MEASURING METHOD AND LENGTH | 300.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY, QQ-A-601, ALLOY 356, TEMPER T6 |