National Stock Number (NSN) Output Data
NSN:
NIIN:
Item Name:
WASHER , LOCK
Definition:
A WASHER WHICH IS USUALLY ROUND WITH A CENTRALLY LOCATED HOLE. ITS EDGES AND TWO BEARING SURFACES ARE SO DESIGNED THAT APPLIED PRESSURE BRINGS INTO PLAY THE SPRING TENSION AND/OR FRICTIONAL LOCKING PRINCIPLE WHICH MATERIALLY RESISTS ANY TENDENCY TOWARD TURNING. IT MAY BE MADE OF ONE OR TWO PIECES
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 12Z22-53 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| MS35338-46 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 503-4-04022-015 | K2523 | A | 5 | 2 | 2 | ZK | ||
| FFW84 | 81348 | M | 4 | 1 | 4 | HX | ||
| 104J005-29 | 62793 | R | 5 | 9 | 5 | HX | ||
| AN935-616 | 88044 | M | C | 1 | 4 | TU | AB | |
| MS35338-46 | 80205 | A | 3 | 2 | E | ZZ | ||
| 004-003005-055 | 26916 | A | 5 | 2 | E | KZ | ||
| 01-013782-008 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 3-07620-311 | 94231 | A | 5 | 2 | 1 | KZ |
CAGE Information
| Code | Company |
|---|---|
| 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
| K2523 | EATON AEROSPACE LTD |
| 81348 | FEDERAL SPECIFICATIONS PROMULGATED B |
| 62793 | BFM ENERGY PRODUCTS CORP |
| 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF |
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
| 94231 | THE CHAMPION COMPANY DBA CHAMPION DI |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABKV | OUTSIDE DIAMETER | 0.683 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.683 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | MRAP-RG-33 |
| MATT | MATERIAL | STEEL COMP 1078 OVERALL OR STEEL COMP 1060 OVERALL OR STEEL COMP 1070 OVERALL OR STEEL COMP 1080 OVERALL |
| STYL | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 STYLE AND A CLASS |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND ZINC OVERALL AND CHROMATE OVERALL OR CHROMATE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| FEAT | SPECIAL FEATURES | CERTIFIED FREE FROM MERCURY CONTAMINATION |
| TEST | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABPX | MATERIAL THICKNESS | 0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | MATERIAL MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| AAUB | HOLE DIAMETER | 0.382 INCHES MINIMUM AND 0.393 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | Q-P-416,TYPE2,CLASS3 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-Z-325,TYPE2,CLASS2 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
Similar Parts
004-003005-055 ,
004003005055 ,
5310-00-004-5033 ,
5310000045033 ,
000045033
,
12Z22-53 ,
MS35338-46 ,
503-4-04022-015 ,
FFW84 ,
104J005-29 ,
AN935-616 ,
MS35338-46 ,
004-003005-055 ,
01-013782-008 ,
3-07620-311 ,