Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , LOCK
Definition:
A WASHER WHICH IS USUALLY ROUND WITH A CENTRALLY LOCATED HOLE. ITS EDGES AND TWO BEARING SURFACES ARE SO DESIGNED THAT APPLIED PRESSURE BRINGS INTO PLAY THE SPRING TENSION AND/OR FRICTIONAL LOCKING PRINCIPLE WHICH MATERIALLY RESISTS ANY TENDENCY TOWARD TURNING. IT MAY BE MADE OF ONE OR TWO PIECES
CAGE Information
| Code | Company |
|---|---|
| SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-PP-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| ABPX | MATERIAL THICKNESS | 0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM |
| STYL | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
| AAUB | HOLE DIAMETER | 0.168 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | MRAP RG-31/ROUTE CLEARANCE VEHICLE;RG-33 |
| MATT | MATERIAL | STEEL COMP 304 OVERALL OR STEEL COMP 316 OVERALL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 STYLE AND C CLASS |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| ABKV | OUTSIDE DIAMETER | 0.296 INCHES MAXIMUM |