Part Number
Part Number:
NSN:
NIIN:
Item Name:
PIN , STRAIGHT , HEADLESS
Definition:
A HEADLESS, CYLINDRICALLY-SHAPED ITEM HAVING A STRAIGHT, SMOOTH, SOLID BODY, WITH OR WITHOUT A DRILLED HOLE(S). IT HAS AN OUTSIDE DIAMETER EQUAL TO OR LESS THAN ITS LENGTH. ITS LENGTH MUST NOT EXCEED TWELVE INCHES (304 MM); FOR ITEMS WHOSE LENGTH EXCEEDS TWELVE INCHES (304 MM); SEE ROD, STRAIGHT, HEADLESS. IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. SEE ALSO PIN, STRAIGHT, THREADED.
CAGE Information
| Code | Company |
|---|---|
| 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ACHT | PIN OVERALL LENGTH | 2.830 INCHES MINIMUM AND 2.870 INCHES MAXIMUM |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.320 INCHES NOMINAL |
| ACHU | PIN OVERALL DIAMETER | 0.2500 INCHES NOMINAL |
| ABRD | SECOND HOLE DIAMETER | 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| ABRC | FIRST HOLE DIAMETER | 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | F-5, AIRCRAFT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.510 INCHES MINIMUM AND 0.550 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AAGZ | FIRST END STYLE | CHAMFERED |