Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
| Code |
Company |
| 60528 |
TRAILMOBILE INC SUB OF THE PULLMAN C |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABRY |
LENGTH |
1.750 INCHES MINIMUM AND 1.766 INCHES MAXIMUM |
| ABRY |
LENGTH |
1.750 INCHES MINIMUM AND 1.766 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| MATT |
MATERIAL |
STEEL COMP 1010 OVERALL |
| ABMW |
PERIPHERAL SHAPE STYLE |
RECTANGULAR |
| AAUB |
HOLE DIAMETER |
0.328 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| ASDB |
WIDTH ACROSS FLATS |
0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| ABNM |
THICKNESS |
0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-633-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
Similar Parts