Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
| Code |
Company |
| 32195 |
OUTBOARD MARINE CORP JOHNSON MOTORS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 GRADE AND A TYPE AND A CLASS |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-636,COND 1-CANCELED FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-S-636,COND 2-CANCELED FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| ABNM |
THICKNESS |
0.064 INCHES NOMINAL |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| ADAV |
OVERALL DIAMETER |
0.562 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL OVERALL OR STEEL OVERALL |
| AAUB |
HOLE DIAMETER |
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
Similar Parts