Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
| Code |
Company |
| 18876 |
U S ARMY AVIATION AND MISSILE COMMAN |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| SFTT |
SURFACE TREATMENT |
ZINC OVERALL |
| MATT |
MATERIAL |
STEEL COMP 1009 OVERALL OR STEEL COMP 1015 OVERALL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| ABNM |
THICKNESS |
0.050 INCHES NOMINAL |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| AAUB |
HOLE DIAMETER |
0.223 INCHES MINIMUM AND 0.233 INCHES MAXIMUM |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| ADAV |
OVERALL DIAMETER |
0.672 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
Similar Parts