Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 81205 | THE BOEING COMPANY DBA BOEING DIV DE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ATPC | STEP QUANTITY | 6 |
| ATPC | STEP QUANTITY | 6 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| CSPY | LARGEST STEP DIAMETER | 1.500 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.0870 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 0.0600 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.4500 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | B-52 ACFT |
| AMFZ | SECOND END DIAMETER | 0.9990 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 5.089 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 1.2400 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | UPPER SIDE BRACE |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 0.3100 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED, WOODRUFF KEYWAY AND SPLINED (STRAIGHT) |
| AMDL | FIRST END DIAMETER | 1.2490 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| AAHG | FIRST END GROOVE WIDTH | 0.2600 INCHES NOMINAL |
| AAHP | SECOND END STYLE | INTERNAL THREADED |
| BDSQ | FIRST END SPLINE QUANTITY | 34 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.0120 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4130 |