Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 81205 | THE BOEING COMPANY DBA BOEING DIV DE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AGAV | END ITEM IDENTIFICATION | C-135 AIRCRAFT |
| AMFZ | SECOND END DIAMETER | 1.7500 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 7.890 INCHES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 27 |
| AMGA | SECOND END SPLINE LENGTH | 0.440 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 1.6875 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.5625 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.7500 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| FEAT | SPECIAL FEATURES | STEP BEHIND SM. END IS SPLINED-14 SPLINES,MATES W/PART NO.6.72084; SPLINED END HAS 3 THREADED HOLES,EQUALLYSPACED |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.650 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| CSPY | LARGEST STEP DIAMETER | 1.750 INCHES NOMINAL |
| AMGE | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 250.0 MICROINCHES |
| MATT | MATERIAL | STEEL COMP 4340 |