Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , AXLE , AUTOMOTIVE
Definition:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
CAGE Information
| Code | Company |
|---|---|
| 30379 | EUCLID INC |
Federal Supply Class
Title
VEHICULAR POWER TRANSMISSION COM
Inclusions:
INCLUDES TRANSFER TRANSMISSION ASSEMBLIES; CLUTCH ASSEMBLIES; UNIVERSAL JOINTS; PROPELLER SHAFTS; AUTOMOTIVE TORQUE CONVERTERS; POWER TAKEOFFS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 52.750 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | NOT RATED |
| AMDM | FIRST END SPLINE LENGTH | 2.750 INCHES NOMINAL |
| BBCD | FIRST END SPLINE QUANTITY | 18 |
| BNTC | FIRST END FACILITY WIDTH | 0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| MATL | MATERIAL | STEEL, 10024, EUCLID DIV, GENERAL MOTORS CORP |
| BNYX | FIRST END SPLINE TYPE | INVOLUTE |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| AMQF | SECOND END TYPE | SPLINED |
| AMDS | FIRST END PITCH DIAMETER | 2.250 INCHES NOMINAL |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AMQA | FIRST END TYPE | SPLINED |
| BNTD | FIRST END FACILITY LOCATION | 0.620 IN. FROM SHAFT END |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BBCF | SECOND END SPLINE QUANTITY | 18 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNPJ | FIRST END FACILITY DIAMETER | 2.205 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 2.380 INCHES NOMINAL |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNYY | FIRST END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AMGF | SECOND END PITCH DIAMETER | 2.250 INCHES NOMINAL |