Part Number
Part Number:
NSN:
NIIN:
Item Name:
MOTOR , ALTERNATING CURRENT
Definition:
A MOTOR WHICH IS DESIGNED FOR OPERATION FROM AN ALTERNATING CURRENT SOURCE. SEE ALSO MOTOR, CONTROL.
CAGE Information
| Code | Company |
|---|---|
| 51802 | HANSOME ENERGY SYSTEMS INC |
Federal Supply Class
Title
MOTORS, ELECTRICAL
Inclusions:
Exclusions:
EXCLUDES STARTING MOTORS FOR ENGINES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAJT | OVERALL HEIGHT | 24.500 INCHES |
| AAJV | OVERALL WIDTH | 31.812 INCHES |
| CQJX | NOMINAL THREAD SIZE | 1.250 INCHES SINGLE END |
| AXGY | MOUNTING METHOD | FACE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| FAAZ | PHASE | THREE INPUT |
| BFMF | COOLING METHOD | AMBIENT AIR |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| AASA | THREAD LENGTH | 1.8130 INCHES NOMINAL SINGLE END |
| THSD | THREAD SERIES DESIGNATOR | UNF SINGLE END |
| ANPZ | INCLOSURE FEATURE | DRIPPROOF PROTECTED-45 DEG |
| CWGL | CURRENT RATING IN AMPS | 18.000 LOW INPUT OR 80.000 HIGH INPUT |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 16 UNTHREADED HOLE |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| CWFX | ROTOR SPEED RATING IN RPM | 450.0 LOW NO LOAD AND 900.0 HIGH NO LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CNMM | FRAME SIZE DESIGNATION | 504WVY |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| CNXS | POWER RATING | 7.000 HORSEPOWER OUTPUT OR 55.000 HORSEPOWER OUTPUT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 22.625 INCHES SINGLE END |
| CWDY | TEMP RATING | 50.0 OPERATING DEG CELSIUS |
| AKPS | DUTY CYCLE | CONTINUOUS |
| FEAT | SPECIAL FEATURES | SHAFT END STYLE A2 HAS A HOLE 0.3120 IN. DIA THRU THD 0.8750 IN. FROM END OF SHAFT TO CTR OF HOLE |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| BKPB | CURRENT RATING METHOD | LOAD |
| AAJU | OVERALL LENGTH | 59.687 INCHES |
| CWHZ | SHAFT END CHARACTERISTIC | A10 SECOND STYLE SINGLE END AND A2 FIRST STYLE SINGLE END AND A10 THIRD STYLE SINGLE END AND A10 FOURTH STYLE SINGLE END |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 22.000 INCHES |