Part Number
Part Number:
NSN:
NIIN:
Item Name:
PIN , STRAIGHT , HEADLESS
Definition:
A HEADLESS, CYLINDRICALLY-SHAPED ITEM HAVING A STRAIGHT, SMOOTH, SOLID BODY, WITH OR WITHOUT A DRILLED HOLE(S). IT HAS AN OUTSIDE DIAMETER EQUAL TO OR LESS THAN ITS LENGTH. ITS LENGTH MUST NOT EXCEED TWELVE INCHES (304 MM); FOR ITEMS WHOSE LENGTH EXCEEDS TWELVE INCHES (304 MM); SEE ROD, STRAIGHT, HEADLESS. IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. SEE ALSO PIN, STRAIGHT, THREADED.
CAGE Information
| Code | Company |
|---|---|
| 56848 | UNITED STATES DEPARTMENT OF TREASURY |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.125 INCHES NOMINAL |
| ACHT | PIN OVERALL LENGTH | 4.625 INCHES NOMINAL |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES OUTSIDE DIAMETER |
| ACHU | PIN OVERALL DIAMETER | 1.1780 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | PLATE WELDED TO DRILLED END,CENTRALLY LOCATED,3.750 IN. LONG X 1.125 IN. WIDE X 0.500 IN. THICK WITH 2 0.562 IN. DIA THRU-DRILLS CENTRALLY LOCATED ALONG WIDTH AND 2.500 IN. CENTER TO CENTER DISTANCE BETWEEN HOLES; 0.438 IN. DIA HOLE DRILLED THROUGH CENTER OF PLATE INTO CENTER OF PIN 3.000 IN. DEEP |
| AMCS | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 0.125 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CHAMFERED |