Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 10941 | CARVER PUMP COMPANY INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFT | SECOND END KEYWAY DEPTH | 0.1875 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 9 |
| AMFR | SECOND END KEYWAY WIDTH | 0.0937 INCHES NOMINAL |
| AAHP | SECOND END STYLE | EXTERNALLY THREADED AND FLAT KEYWAY |
| CSPY | LARGEST STEP DIAMETER | 1.812 INCHES NOMINAL |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 0.7187 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.625 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 33.000 INCHES NOMINAL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.5000 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.3719 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| MATT | MATERIAL | NICKEL ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CLASS A ORB FED SPEC SINGLE MATERIAL RESPONSE |