Part Number
Definition:
A DEFORMABLE MATERIAL WHICH PREVENTS THE PASSAGE OF MATTER THROUGH THE JOINT FORMED WHEN TWO FACES ARE JOINED. IT MAY BE METALLIC OR NONMETALLIC, LUBRICATED OR IMPREGNATED, SOLID OR HOLLOW CROSS SECTION. IT MAY BE MADE TO ANY PREDETERMINED DIMENSION AND SHAPE. EXCLUDES FLAT DISKS, ITEMS MADE OF FELT MATERIAL AND ITEMS HAVING JOINTS. FOR ROUND METAL AND PLASTIC ITEMS WITH AN APERTURE AND A SOLID RECTANGULAR CROSS SECTION, SEE WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; AND SPACER RING. EXCLUDES DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; AND RING, SEALING JAR.
CAGE Information
| Code | Company |
|---|---|
| 50406 | ARGON ST INC. |
Federal Supply Class
Title
PACKING AND GASKET MATERIALS
Inclusions:
INCLUDES GENERAL PURPOSE OIL GREASE, AIR, LIQUID, GAS, AND CHEMICAL SEALS; OAKUM; PREFABRICATED GASKETS AND SEALS DESIGNED FOR A SINGLE SPECIFIC APPLICATION.
Exclusions:
EXCLUDES O-RINGS (FSC 5331); BULK MATERIAL ITEMS, SUCH AS; RUBBER, CORK, AND ASBESTOS SHEETS AND STRIPS (FSG 93); LIQUID GASKET MATERIALS (RTV, PERMATEX, ETC.) (FSG 80); RFI AND EMI SEALS AND GASKETS (FSC 5999), AND ALL SEAL RETAINERS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STYL | STYLE DESIGNATOR | NON-CIRCULAR |
| MATT | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL |
| ADPW | OUTSIDE CORNER RADIUS | 0.090 INCHES NOMINAL |
| ADUF | APERTURE LENGTH | 4.870 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | OPTIONAL CHAMFER 45 DEGREES BY 0.090 IN. OR 0.120 IN. |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.440 INCHES NOMINAL |
| CTSC | OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH | 0.190 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 6 |
| CTRH | OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH | 0.500 INCHES NOMINAL |
| ADPQ | INSIDE CORNER RADIUS | 0.060 INCHES NOMINAL |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.031 INCHES NOMINAL |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.180 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.188 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.220 INCHES MINIMUM AND 2.250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 5.220 INCHES MINIMUM AND 5.250 INCHES MAXIMUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| ADUE | APERTURE WIDTH | 1.250 INCHES NOMINAL |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.250 INCHES NOMINAL |