Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 81349 | MILITARY SPECIFICATIONS PROMULGATED |
Federal Supply Class
Title
ENGINE AIR AND OIL FILTERS, STRA
Inclusions:
INCLUDES COMPONENTS FOR ALL ENGINES EXCEPT AIRCRAFT AND GUIDED MISSILE PRIME MOVING.
Exclusions:
EXCLUDES AIR AND OIL FILTERS (FSC 4310, 4330), STRAINERS (FSC 4730) AND CLEANERS (FSC 4310) NOT SPECIFICALLY DESIGNED FOR USE WITH ENGINES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APGF | DESIGN TYPE | NONREUSABLE |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| MATT | MATERIAL | ANY ACCEPTABLE SEAL |
| MATT | MATERIAL | ANY ACCEPTABLE FILTERING MEDIUM |
| ABPM | BODY DIAMETER | 6.750 INCHES MAXIMUM |
| AZKQ | TEMP RATING | 250.0 DEG FAHRENHEIT NOMINAL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| ADNH | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE AND 10.0 NOMINAL |
| ADAS | BODY INSIDE DIAMETER | 2.500 INCHES MINIMUM AND 2.560 INCHES MAXIMUM |
| CRXW | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| ZZZV | FSC APPLICATION DATA | OIL FILTER,INTERNAL COMBUSTION ENGINE,NONAIRCRAFT,FILTER ELEMENT SHALL BE PROCURED I/A/W FEDERAL SPEC NR F-F-351,TYPE 4,CLASS 4 |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
| AZTL | BODY OVERALL LENGTH | 17.940 INCHES MINIMUM AND 18.060 INCHES MAXIMUM |
| ADNQ | DIFFERENTIAL PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| ADNP | DROP PRESSURE | 3.0 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | ANY ACCEPTABLE CONTAINER/CARTRIDGE |