Part Number
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
CAGE Information
| Code | Company |
|---|---|
| 24975 | PRESTOLITE ELECTRIC INCORPORATED |
Federal Supply Class
Title
ENGINE ELECTRICAL SYSTEM COMPONE
Inclusions:
INCLUDES GENERATORS; MAGNETOS; SPARK PLUGS; IGNITION COILS; IGNITION DISTRIBUTORS; ENGINE VOLTAGE REGULATORS; IGNITION HARNESS ASSEMBLIES; STARTING MOTORS FOR ENGINES.
Exclusions:
EXCLUDES VEHICULAR LIGHTING FIXTURES (FSC 6220) AND AIRCRAFT GENERATORS (FSC 2925).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| BZRR | THREAD SERIES | UNF |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 3000 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 900 |
| AASA | THREAD LENGTH | 0.500 INCHES NOMINAL |
| AWDP | THREAD DIAMETER | 0.500 INCHES NOMINAL |
| ABFF | FURNISHED ITEMS | OVERLOAD PROTECTIVE DEVICE |
| ELEC | VOLTAGE IN VOLTS | 32.0 |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| ADER | MOUNTING STYLE | BODY MTD W/FOUR THREADED MTG HOLES |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| ABPT | SECOND STEP DIAMETER | 0.750 INCHES NOMINAL |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1500 |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ABVA | UNTHREADED PORTION LENGTH | 0.750 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | NOT RATED |
| BCGW | DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER | 3.000 INCHES NOMINAL |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| ADPY | PILOT HEIGHT | ANY ACCEPTABLE |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 5.0 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 45.0 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 24 |
| ABRR | KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| CFHL | THREAD CLASS | 2A |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 0.875 INCHES NOMINAL |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 90.0 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| BCMK | DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER | 6.000 INCHES NOMINAL |
| AFYS | KEYWAY LENGTH | 0.750 INCHES NOMINAL |