Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 14541 | CAMERON INTERNATIONAL CORPORATION DB |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| CSPY | LARGEST STEP DIAMETER | 1.625 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 11.625 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.3780 INCHES NOMINAL |
| AMEB | FIRST END HOLE DEPTH | 0.750 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 2 |
| MATT | MATERIAL | STEEL |
| AMDL | FIRST END DIAMETER | 1.3780 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.312 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| AMDX | FIRST END HOLE DIAMETER | 0.1560 INCHES NOMINAL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.562 INCHES NOMINAL |