Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 54764 | MANCRAFT INDUSTRIES INC |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRXX | MEASURING METHOD AND LENGTH | 240.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-13444 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING BRASS |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY HOSE DIM.,AND END CONNECTIONS |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQRB | SEAT ANGLE | 45.0 DEGREES 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-H-13444 GOVERNMENT SPECIFICATION |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AARX | INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| ABKV | OUTSIDE DIAMETER | 0.421 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 2B 1ST END |
| CRSM | VACUUM IN TORR | 254.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | 625.0 POUNDS PER SQUARE INCH |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |