Part Number
Part Number:
NSN:
NIIN:
Item Name:
MOUNT , RESILIENT , GENERAL PURPOSE
Definition:
AN ITEM MADE OF MATERIAL HAVING ELASTIC PROPERTIES. IT MAY HAVE RIGID MOUNTING FACILITIES SUCH AS A FLANGE(S), SLEEVE(S), STUD(S) OR THE LIKE. IT IS DESIGNED TO ISOLATE OR DAMPEN SHOCK AND/OR VIBRATION OF A CONTINUOUS OR INTERMITTENT ORIGIN AND SERVE AS A SUPPORT FOR AN ITEM TO BE ISOLATED. EXCLUDES MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (AS MODIFIED); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; HYDRAULIC AND PNEUMATIC SHOCK ABSORBERS, DASHPOTS, GROMMETS AND SHOCK PADS.
CAGE Information
| Code | Company |
|---|---|
| 76005 | LORD CORPORATION DBA AEROSPACE DIVIS |
Federal Supply Class
Title
HARDWARE, COMMERCIAL
Inclusions:
INCLUDES ACCESS COVERS; BUMPERS; CASTERS; CABINET AND DOOR HARDWARE; CLEVISES; HINGES; LATCHES; STRAPS AND STRAPPING; TURNBUCKLES; WEBBED STRAPS.
Exclusions:
EXCLUDES WEAPONS SYSTEM HARDWARE (FSC 5342).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BOLT |
| BXCD | DISTANCE FROM FLANGE TO END | 0.450 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.145 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | HOLES SLOTTED 0.118-0.123 IN. BY 0.215 IN.; MATCHED SET,4 ISOLATORS,SET SHALL BE FABRICATED USING SAME ELASTOMER LOT; INERTIAL PLATFORM ASSEMBLY,MX-9923/A |
| AGFF | FLANGE WIDTH | 1.250 INCHES NOMINAL |
| AYXK | MAXIMUM LOAD RATING | 9.0 POUNDS |
| BXDM | RESILIENT MEMBER MATERIAL | SILICONE RUBBER |
| AFQN | FLANGE LENGTH | 1.875 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY MOUNTING FLANGE PLATE |
| HGTH | HEIGHT | 1.030 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | CHROMATE MOUNTING FLANGE PLATE |
| MATT | MATERIAL | STEEL CORROSION RESISTING BOLT OR ALUMINUM ALLOY BOLT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE MOUNTING FLANGE PLATE |
| STYL | STYLE DESIGNATOR | ROUND W/BUSHING TWO-HOLE FLANGE |
| AARX | INSIDE DIAMETER | 0.165 INCHES MINIMUM AND 0.168 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE MOUNTING FLANGE PLATE |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.464 INCHES MINIMUM AND 1.474 INCHES MAXIMUM |