Part Number
Part Number:
NSN:
NIIN:
Item Name:
RESISTOR , FIXED , WIRE WOUND , INDUCT
Definition:
INC 37403 REINSTATED ON 010303~A RESISTOR WHOSE OHMIC VALUE CANNOT BE ADJUSTED OR VARIED. THE RESISTANCE ELEMENT CONSISTS OF HIGH RESISTANCE WIRE (OR RIBBON) EITHER WOUND ON AN INSULATED FORM OR CONSTRUCTED SO AS TO BE SELF-SUPPORTING. THE ITEM MUST HAVE INHERENT CHARACTERISTICS OF INDUCING SELF-INDUCTANCE. OPPOSITION TO CURRENT FLOW IS AN INHERENT PROPERTY OF THE RESISTANCE WIRE AND IS MANIFESTED BY THE HEAT DISSIPATION IN THE RESISTOR. EXCLUDES SUPPRESSOR, IGNITION INTERFERENCE. SEE ALSO RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
CAGE Information
| Code | Company |
|---|---|
| 07482 | GENERAL ELECTRIC COMPANY DBA GE DIV |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPP | ELECTRICAL RESISTANCE | 10.000 OHMS |
| ABJT | TERMINAL LENGTH | 1.380 INCHES MINIMUM AND 1.620 INCHES MAXIMUM |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| CBME | CUBIC MEASURE (NON-CORE) | 0.019 CUBIC INCHES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AGAV | END ITEM IDENTIFICATION | J79 AMPLIFIER |
| ABPM | BODY DIAMETER | 0.156 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+275.0 |
| TEST | TEST DATA DOCUMENT | 07482-J115 DRAWING |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000/+1.000 |
| PKWT | UNPACKAGED UNIT WEIGHT | 0.7 GRAMS |
| AARB | TERMINAL TYPE | WIRE LEAD |
| AEFB | POWER DISSIPATION RATING IN WATTS | 3.000 FREE AIR |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -20.0/+20.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | 07482-J115 MANUFACTURERS SOURCE CONTROL |
| ADAQ | BODY LENGTH | 0.500 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |