Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 18954 | KORODY-COLYER CORP A CR INDUSTRIES C |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| BDSQ | FIRST END SPLINE QUANTITY | 48 |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| ATPC | STEP QUANTITY | 8 |
| ABHP | OVERALL LENGTH | 17.688 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.2480 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | NICKEL COPPER ALLOY;48 SERRATIONS ON SECOND END |
| AMDM | FIRST END SPLINE LENGTH | 2.438 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| AMDL | FIRST END DIAMETER | 1.2480 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.8652 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.936 INCHES MINIMUM AND 1.937 INCHES MAXIMUM |
| MATT | MATERIAL | NICKEL COPPER ALLOY |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.1860 INCHES NOMINAL |