Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 18954 | KORODY-COLYER CORP A CR INDUSTRIES C |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSPY | LARGEST STEP DIAMETER | 0.872 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.872 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| FEAT | SPECIAL FEATURES | BOTH ENDS 48 SERRATIONS EQUALLY SPACED;SECOND END FLAT 0.375 IN. DISTANCE FROM END TO FLAT,0.500 IN. FLAT LG,0.188 IN. FLAT DP;SECOND END INTERNAL THD HOLE SQ TO A DP OF 0.562 IN. |
| AAGZ | FIRST END STYLE | PLAIN |
| AAHW | SECOND END GROOVE WIDTH | 0.0700 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1137 OR STEEL COMP 1141 OR STEEL COMP 1144 |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED AND INTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 8.688 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.8720 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.774 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AMDL | FIRST END DIAMETER | 0.8720 INCHES NOMINAL |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 0.438 INCHES NOMINAL |
| AAHX | SECOND END GROOVE DIAMETER | 0.7190 INCHES NOMINAL |