Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 72582 | TOGNUM AMERICA INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ATPC | STEP QUANTITY | 6 |
| ATPC | STEP QUANTITY | 6 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| AMFZ | SECOND END DIAMETER | 0.6250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 7.780 INCHES NOMINAL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.535 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| CSPY | LARGEST STEP DIAMETER | 1.363 INCHES NOMINAL |
| BDSQ | FIRST END SPLINE QUANTITY | 12 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.8795 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.9810 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.9810 INCHES NOMINAL |
| MATT | MATERIAL | NAVAL BRASS-CA 464 |
| AMDM | FIRST END SPLINE LENGTH | 2.570 INCHES NOMINAL |