Part Number
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
CAGE Information
| Code | Company |
|---|---|
| 46717 | PETTIBONE LLC |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSML | BOTTOM RECESS DIAMETER | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 1.062 INCHES NOMINAL |
| CRSD | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LT-40-S FSCM 467 17 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| CRKG | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL |
| CQJW | TOP RECESS DIAMETER | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.688 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | RECESSED BOTH SIDES |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |