Part Number
Part Number:
NSN:
NIIN:
Item Name:
MOTOR , CONTROL
Definition:
A MOTOR WHICH IS DESIGNED TO BE OPERATED FROM TWO INDEPENDENT VOLTAGE SOURCES, IN SUCH A WAY THAT VARIATIONS IN ONE VOLTAGE SOURCE WILL DETERMINE THE DIRECTION AND SPEED OF THE MOTOR. IN THE ALTERNATING CURRENT TYPE THE VOLTAGES ARE USUALLY APPLIED TO A SPLIT-PHASE STATOR, WHEREAS IN THE DIRECT CURRENT TYPE, ONE VOLTAGE IS APPLIED TO THE STATOR AND THE OTHER TO THE ARMATURE. LOW INERTIA AND RAPID REVERSIBILITY ARE INHERENT CHARACTERISTICS OF THIS TYPE OF MOTOR. SEE ALSO SERVOMOTOR, AUTOMATIC PILOT.
CAGE Information
| Code | Company |
|---|---|
| 80249 | BAE SYSTEMS INFORMATION AND ELECTRON |
Federal Supply Class
Title
MOTORS, ELECTRICAL
Inclusions:
Exclusions:
EXCLUDES STARTING MOTORS FOR ENGINES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ACDC | CURRENT TYPE | AC INPUT |
| ACDC | CURRENT TYPE | AC INPUT |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| ABWV | SHAFT DIAMETER | 0.156 INCHES NOMINAL SECOND END |
| AAJV | OVERALL WIDTH | 2.375 INCHES |
| AAJU | OVERALL LENGTH | 4.562 INCHES |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| BFML | CONTROL FIELD WINDING TYPE | SINGLE WINDING W/CENTER TAP |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 1.062 INCHES SECOND END |
| CQRR | TAPER | 8.000 PER FOOT IN INCHES FIRST END |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 4900.0 AND 5100.0 |
| ABPA | UNDERCUT DIAMETER | 0.075 INCHES NOMINAL FIRST END |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 300.0 AC |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| AXGY | MOUNTING METHOD | PAD |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.375 INCHES FIRST END |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| BKPH | TORQUE RATING AND TYPE | 5.0 INCH-OUNCES STALLED |
| CWHZ | SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SECOND END |
| ABXQ | FLATTED PORTION LENGTH | 0.7500 INCHES NOMINAL SECOND END |
| BFNF | UNDERCUT CENTER TO SHAFT END DISTANCE | 0.130 INCHES MINIMUM FIRST END AND 0.140 INCHES MAXIMUM FIRST END |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.500 INCHES |
| FEAT | SPECIAL FEATURES | SHAFT END SECOND STYLE 0.157 IN. DIA; SHAFT END THIRD STYLE 0.112 IN. DIA |
| CWFX | ROTOR SPEED RATING IN RPM | 3300.0 SINGLE NO LOAD |
| CWHZ | SHAFT END CHARACTERISTIC | A2 FIRST STYLE FIRST END AND A4 SECOND STYLE FIRST END AND A28 THIRD STYLE FIRST END |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| AAJT | OVERALL HEIGHT | 2.875 INCHES |
| CWDY | TEMP RATING | -29.0 AMBIENT DEG CELSIUS AND 65.0 AMBIENT DEG CELSIUS |
| AGRB | FLAT DEPTH | 0.016 INCHES MINIMUM SECOND END AND 0.017 INCHES MAXIMUM SECOND END |
| AGQL | UNDERCUT LENGTH | 0.030 INCHES NOMINAL FIRST END |
| FAAZ | PHASE | TWO INPUT |
| AASA | THREAD LENGTH | 0.120 INCHES NOMINAL FIRST END |
| ABWV | SHAFT DIAMETER | 0.112 INCHES NOMINAL FIRST END |
| ABND | TAPER LENGTH | 0.179 INCHES MINIMUM FIRST END AND 0.189 INCHES MAXIMUM FIRST END |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.920 INCHES |
| THSD | THREAD SERIES DESIGNATOR | UNF FIRST END |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES FIRST END |