Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , METALLIC
Definition:
A LENGTH OF METALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, METALLIC. EXCLUDES CONDUIT, ELECTRICAL; CONDUIT ASSEMBLY, ELECTRICAL; CASING, FLEXIBLE CONTROL; AND CASING, FLEXIBLE SHAFT ASSEMBLY.
CAGE Information
| Code | Company |
|---|---|
| 64160 | OHIO HYDRAULICS INC |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADJM | INNER CONVEYING TUBE MATERIAL | STEEL, QQ-S-766, CLASS 321 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AGAV | END ITEM IDENTIFICATION | ALLISON GAS TURBINE GENERATOR SET,MDL.501K |
| AJEE | RAISED FACE DIAMETER | 3.630 INCHES NOMINAL 1ST END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, QQ-S-766, CLASS 321 |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| CTCJ | FLANGE STYLE | ROUND W/ BOLT HOLES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| ADJL | INNER CONVEYING TUBE STYLE | ANNULAR OPEN-PITCH CORRUGATED |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| CTCJ | FLANGE STYLE | ROUND W/ BOLT HOLES 2ND END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, QQ-S-766, CLASS 321 |
| AHNC | CONNECTION STYLE | RAISED 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 24.380 INCHES NOMINAL WORKING |
| AHNC | CONNECTION STYLE | RAISED 2ND END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| AARX | INSIDE DIAMETER | 2.000 INCHES NOMINAL |
| CQBD | BURST TEST PRESSURE | 1600.0 POUNDS PER SQUARE INCH |
| ABKV | OUTSIDE DIAMETER | 2.790 INCHES NOMINAL |