Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 9N879 | FLUITEK CORP |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRXW | FILTERING MEDIA DESIGN | LAYERED 2ND FILTERING MEDIA RESPONSE |
| APGF | DESIGN TYPE | NONREUSABLE |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| AGAV | END ITEM IDENTIFICATION | KF50 HIGH PRESSURE FILTER |
| ADNP | DROP PRESSURE | NOT RATED |
| CRXW | FILTERING MEDIA DESIGN | LAYERED 3RD FILTERING MEDIA RESPONSE |
| CRXW | FILTERING MEDIA DESIGN | WOVEN 1ST FILTERING MEDIA RESPONSE |
| MATT | MATERIAL | GLASS FIBER FILTERING MEDIUM |
| ADAS | BODY INSIDE DIAMETER | 1.620 INCHES NOMINAL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| ABPM | BODY DIAMETER | 4.000 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (NON-RIGID) |
| AZTL | BODY OVERALL LENGTH | 9.000 INCHES NOMINAL |
| AZKQ | TEMP RATING | -20.0 DEG FAHRENHEIT MINIMUM AND 225.0 DEG FAHRENHEIT MAXIMUM |
| FEAT | SPECIAL FEATURES | FILTER CONTAINS A CRUSH-PROTECTIVE CENTER TUBE, FILTERING DESIGN CONSIST OF 7 LAYERS, 2 LAYERS EPOXY COATED STEEL FABRIC FOR MAXIMUM SUPPORT, 2 LAYERS POLYPROPYLENE SCRIM FILTERS AND PROTECTS MEDIA AND ADDS FINAL PASS FILTRATION, 2 LAYERS OF SYNTHETIC GLASS FOR ULTRA FINE FILTRATION, AND LAYER OF Z MEDIA PROVIDES MAXIMUM DIRT-HOLDING CAPACITY WITH MINIMUM PRESSURE DROP |
| ADNQ | DIFFERENTIAL PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| ADNH | FILTRATION RATING IN MICRONS | 10.0 ABSOLUTE |