Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 17858 | ZEKS AIR DRIER CORP SUB OF KEMP CO |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AZTL | BODY OVERALL LENGTH | 9.875 INCHES NOMINAL |
| APGF | DESIGN TYPE | NONREUSABLE |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| MEDA | MEDIA FOR WHICH DESIGNED | AIR |
| AZKQ | TEMP RATING | 200.0 DEG FAHRENHEIT MAXIMUM |
| MATT | MATERIAL | RUBBER SILICONE SEAL |
| AGAV | END ITEM IDENTIFICATION | USNS HENRY J. KAISER |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| MATT | MATERIAL | CELLULOSE FILTERING MEDIUM AND RESIN SYNTHETIC FILTERING MEDIUM |
| CRXW | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| ABPM | BODY DIAMETER | 2.625 INCHES NOMINAL |
| ADNH | FILTRATION RATING IN MICRONS | 3.0 ABSOLUTE AND 0.5 NOMINAL |
| ADNQ | DIFFERENTIAL PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| ADNK | FLOW DIRECTION | INSIDE OUT |