Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 15617 | STRAINSERT COMPANY |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 15.400 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| ATPC | STEP QUANTITY | 7 |
| AMDL | FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286F K-500 FED SPEC SINGLE MATERIAL RESPONSE |
| AAHP | SECOND END STYLE | PLAIN |
| CSPY | LARGEST STEP DIAMETER | 3.750 INCHES NOMINAL |
| MATT | MATERIAL | NICKEL ALLOY K-500 |
| AMFZ | SECOND END DIAMETER | 3.7500 INCHES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CLEVIS PIN |
| AGAV | END ITEM IDENTIFICATION | SEAWOLF CLASS SSN; LEFT IDLER SHEAVE ASSEMBLY |
| FEAT | SPECIAL FEATURES | FORCE SENSING LOAD CLEVIS PIN 0 TO 7000 LB. 4-20 MA OUTPUT; 13 TO 28 V DC INPUT. |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |