Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| S3092 | RHEINMETALL AIR DEFENCE AG |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADAT | BODY WIDTH | 0.203 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.203 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| ABJT | TERMINAL LENGTH | 6.000 INCHES MINIMUM |
| TEST | TEST DATA DOCUMENT | 24446-7736499 SPECIFICATION |
| ABMK | OVERALL WIDTH | 0.203 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 6.375 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.375 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABKW | OVERALL HEIGHT | 0.375 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.074 INCHES MINIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 125.0 SINGLE SECTION |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| APXH | TERMINAL LOCATION | REAR END |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.419 INCHES NOMINAL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.375 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 1 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| ABXF | SHAFT LENGTH | 0.040 INCHES NOMINAL |