Part Number
Definition:
A MECHANICAL FLUID PASSAGE JOINT DESIGNED FOR LINKAGE OF RIGID HYDRAULIC LINES AND COMPONENTS SUBJECT TO PIVOTAL, LINEAR, OR ROTATIONAL POSITION CHANGES. THE DEVICE ALLOWS TWO-DIRECTIONAL FLOW OF HIGH PRESSURE FLUID AND PERMITS SINGLE PLANE ROTATION UPON ITS AXIS. IT MAY ALSO ALLOW FOR ANGULAR MOVEMENT. EXCLUDES SWIVEL JOINT, PIPE; AND SWIVEL JOINT, TUBE.
CAGE Information
| Code | Company |
|---|---|
| 45681 | PARKER-HANNIFIN CORPORATION CORPORAT |
Federal Supply Class
Title
HOSE, PIPE, TUBE, LUBRICATION, A
Inclusions:
INCLUDES ADAPTERS; BENDS; CAPS; CLAMPS; CONNECTORS; COUPLINGS; CROSSES; ELBOWS; EXPANSION JOINTS; FERRULES; FLANGES; LATERALS; LUBRICATION FITTINGS; MANIFOLDS; NIPPLES; NOZZLES; OUTLETS; PLUGS; REDUCERS; SWING AND SWIVEL JOINTS; TEES; TRAPS; UNIONS; WYES.
Exclusions:
EXCLUDES AIR CONDITIONING-HEATING FITTINGS (FSC 4520); BITUMINIZED FIBER AND CONCRETE FITTINGS (FSC 5630); CONDUIT BOXES AND FITTINGS (FSC 5975); DOWNSPOUT FITTINGS (FSC 5670); MEDICAL AND SURGICAL FITTINGS (FSC 6515); LABORATORY FITTINGS (FSC 6640); POST CAPS AND RAIL ENDS (FSC 5660); MACHINE THREAD BUSHINGS AND PLUGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AEHZ | MAXIMUM OPERATING TEMP | 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AHSJ | LEG LENGTH | 3.140 INCHES MINIMUM 1ST END AND 3.180 INCHES MAXIMUM 1ST END |
| FEAT | SPECIAL FEATURES | SYNTHETIC RUBBER BUNA-N SEALS |
| AHNC | CONNECTION STYLE | FLARED (TUBE) 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| CWFD | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.250 INCHES 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL PIPE 2ND END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CWFR | NOMINAL OVERALL LENGTH | 4.875 INCHES |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| AHNC | CONNECTION STYLE | SWIVEL NUT INVERTED FLARE (TUBE) 2ND END |
| MATT | MATERIAL | STEEL OVERALL |
| BYDT | BEARING TYPE | SLEEVE, NONREMOVABLE |
| AAJD | THREAD CLASS | 2A 1ST END |
| STYL | STYLE DESIGNATOR | SINGLE JOINT, ELBOW DESIGN |
| AHSJ | LEG LENGTH | 1.980 INCHES MINIMUM 2ND END AND 2.220 INCHES MAXIMUM 2ND END |
| CQJX | NOMINAL THREAD SIZE | 1.625 INCHES 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| THSD | THREAD SERIES DESIGNATOR | NPSM 2ND END |
| CQJX | NOMINAL THREAD SIZE | 1.250 INCHES 2ND END |
| CQRB | SEAT ANGLE | 30.0 DEGREES 2ND END |